![background image](http://html.mh-extra.com/html/d-link/dcs-4602ev/dcs-4602ev_user-manual_77620053.webp)
53
D-Link DCS-4602EV User Manual
Section 3: Configuration
Create and schedule up to three events with their own settings here. After making any changes, click the
Save
button to save
your changes.
Event name:
Enable this
event:
Priority:
Delay for...:
Enter a name for the event.
Toggle this to activate this event.
Set the priority for this event. Events with higher priority will be executed
first.
Specify the delay time before allowing this event to be triggered again. This
is used for both motion detection events and event triggers.
Event
Selecting this will trigger the event when motion is detected during live
video monitoring. Make sure you have enabled motion detection and
specified what part of the image to monitor for motion. For more details,
refer to
Selecting this will trigger the event in specified intervals. The trigger interval
unit is in minutes.
Selecting this will trigger an event when the system boots up.
Selecting this will trigger an event when the camera's connection to the
network is lost.
Selecting this will trigger an event when tampering has been detected. For
more details, refer to
.
Video Motion
Detection:
Periodic:
Camera Boot:
Network Lost:
Tamper
Detection:
Trigger