42
D-Link DCS-4602EV User Manual
Section 3: Configuration
Here, you can enable a different set of image settings for when the camera
uses night mode. To do so, enable
Night Mode
, select the period of time
you want the different image settings to apply, then adjust the image
settings as desired. After making any changes, click the
Save
button to
save your changes.
Note:
This does not control when night mode will be used; this only
controls when these image settings will be used.
If Night Mode is enabled, you can set a schedule via the drop-down boxes
to set the time span for the settings to take effect.
Changes the exposure mode. Use the drop-down box to set the camera for
Indoor
,
Outdoor
, or
Night
environments, or to
Moving
to capture moving
objects. The
Low
Noise
option will focus on creating a high-quality picture
without noise. You can also create 3 different custom exposure modes. Max
Gain will limit the brightness of the exposure.
This setting controls the amount of noise reduction that will be applied to
the picture.
This setting controls the amount of 3D denoise that will be applied to the
picture. 3D denoise reduces the amount of image noise when viewing a low-
light environment.
Adjust this setting to compensate for backlit subjects.
Adjust this setting to alter the color intensity/strength.
This setting controls the amount of coloration, from grayscale to fully
saturated.
Specify a value from 0 to 100 to specify how much sharpening to apply to
the image.
Night Mode:
This profile
is applied to
Night Mode
from:
Exposure
Mode:
Denoise:
3D Denoise:
Brightness:
Contrast:
Saturation:
Sharpness:
