D-Link AirPremier N DAP-2690 User Manual Download

Page: 46 / 95

D-Link DAP-2690 User Manual

Section 3 - Configuration

Network Name (SSID):

SSID Visibility:

Auto Channel Selection:

Channel Width:

Security:

Captive Profile:

Band:

Select this option to use the same SSID.

Select this option to enable SSID visibility.

Select this option to use auto channel selection.

Select this option to use the same channel width.

Wireless Basic Settings

Wireless:

Wireless Mode:

Data Rate:

Beacon Interval:

DTIM Interval:

Transmit Power:

WMM (Wi-Fi

Multimedia):

Ack Time Out:

Wireless ACL:

Select this option to use the same wireless

settings.

Select this option to use the same wireless mode.

Select this option to use the same data rate.

Select this option to use the same beacon interval.

Select this option to use the same DTIM interval.

Wireless Advanced Settings

Select this option to use the same wireless security.

Select this option to use the same captive profile settings.

Select this option to use the same wireless band.

Select this option to use the same transmit power.

Select this option to use the same WMM settings.

Select this option to use the same ACK timeout value.

Select this option to use the same wireless ACL settings.

Summary of Contents for AirPremier N DAP-2690
































































































Search results

Summary of Contents for AirPremier N DAP-2690

Reviews:

Related manuals for AirPremier N DAP-2690

Brands by name

Popular brands

D-Link AirPremier N DAP-2690, User Manual

Search results

Summary of Contents for AirPremier N DAP-2690

Reviews:

Related manuals for AirPremier N DAP-2690

Brands by name

Popular brands