19
D-Link DAP-2690 User Manual
Section 3 - Configuration
WDS Mode
In WDS mode, the DAP-2690 wirelessly connects multiple networks, without functioning as a wireless AP. After completing the desired settings,
click the
Save
button to let your changes take effect.
Wireless Band:
Mode:
Network Name
(SSID):
SSID Visibility:
Auto Channel
Selection:
Channel:
Channel Width:
Captive Profile:
Select either
2.4 GHz
or
5 GHz
from the drop-down menu.
WDS
is selected from the drop-down menu.
Service Set Identifier (SSID) is the name designated for a
specific wireless local area network (WLAN). The SSID’s
factory default setting is
dlink
. The SSID can be easily
changed to connect to an existing wireless network or to
establish a new wireless network.
Enable
or
Disable
SSID visibility. Enabling this feature
broadcasts the SSID across the network, thus making it
visible to all network users.
Enabling this feature automatically selects the channel that
will provide the best wireless performance. This feature is
not supported in WDS mode.
All devices on the network must share the same channel.
To change the channel, use the drop-down menu to make
the desired selection.
Allows selection of the channel width you would like to
operate in.
20 MHz
and
Auto 20/40 MHz
allow both
802.11n and non-802.11n wireless devices on your network
when the wireless mode is Mixed 802.11 b/g/n in 2.4G and
Mixed 802.11 a/n in 5G. 802.11n wireless devices are allowed
to transmit data using 40 MHz when the channel width is
Auto 20/40 MHz
.
Disable in WDS mode.
Summary of Contents for AirPremier N DAP-2690
Page 1: ......
