15
D-Link DAP-2690 User Manual
Section 3 - Configuration
Wireless Settings
Wireless Band:
Mode:
Network Name
(SSID):
SSID Visibility:
Auto Channel
Selection:
Channel:
Channel Width:
Captive Profile:
Select either
2.4 GHz
or
5 GHz
from the drop-down menu.
Select
Access Point
from the drop-down menu. The other three choices
are
WDS with AP
,
WDS
, and
Wireless Client
.
Service Set Identifier (SSID) is the name designated for a specific wireless
local area network (WLAN). The SSID’s default setting is
dlink
. The SSID
can easily be changed to connect to an existing wireless network or to
establish a new wireless network. The SSID can be up to 32 characters
and is case-sensitive.
Enable
or
Disable
SSID visibility. Enabling this feature broadcasts the SSID
across the network, thus making it visible to all network users.
Enabling this feature automatically selects the channel that provides the
best wireless performance.
Enable
is set by default. The channel selection
process only occurs when the AP is booting up.
All devices on the network must share the same channel. To change the
channel, first toggle the Auto Channel Selection setting to
Disable
, and
then use the drop-down menu to make the desired selection.
Note:
The wireless adapters will automatically scan and match the wireless
settings.
)
Allows selection of the channel width you would like to operate in.
20
MHz
and
Auto 20/40 MHz
allow both 802.11n and non-802.11n wireless
devices on your network when the wireless mode is Mixed 802.11 b/g/n
in 2.4G and Mixed 802.11 a/n in 5G. When the channel width is set to
Auto 20/40 MHz
, then 802.11n wireless devices are allowed to transmit
data using 40 MHz.
Enable or disable captive profile for user authentication.
In Access Point mode, the DAP-2690 functions as a wireless AP. After configuring the desired settings, click the
Save
button.
Access Point Mode
Summary of Contents for AirPremier N DAP-2690
Page 1: ......
