17
D-Link DAP-2690 User Manual
Section 3 - Configuration
WDS with AP Mode
In WDS with AP mode, the DAP-2690 wirelessly connects multiple networks while still functioning as a wireless AP. After completing the desired
settings, click the
Save
button to let your changes take effect.
Wireless Band:
Mode:
Network Name
(SSID):
SSID Visibility:
Auto Channel
Selection:
Channel:
Channel Width:
Captive Profile:
Select either
2.4 GHz
or
5 GHz
from the drop-down menu.
Select
WDS with AP
mode from the drop-down menu.
Service Set Identifier (SSID) is the name designated for a
specific wireless local area network (WLAN). The SSID’s
factory default setting is
dlink
. The SSID can easily be
changed to connect to an existing wireless network or to
establish a new wireless network. The SSID can be up to 32
characters and is case-sensitive.
Enable
or
Disable
SSID visibility. Enabling this feature
broadcasts the SSID across the network, thus making it
visible to all network users.
Enabling this feature automatically selects the channel that
provides the best wireless performance.
Enable
is set by
default. The channel selection process only occurs when
the AP is booting up.
All devices on the network must share the same channel. To
change the channel, first toggle the
Auto Channel Selection
setting to
Disable
, and then use the drop-down menu to
make the desired selection.
Note:
The wireless adapters will
automatically scan and match the wireless settings.
Allows selection of the channel width you would like to
operate in.
20 MHz
and
Auto 20/40 MHz
allow both
802.11n and non-802.11n wireless devices on your network
when the wireless mode is Mixed 802.11 b/g/n in 2.4G and
Mixed 802.11 a/n in 5G. When the channel width is set to
Auto 20/40 MHz
, then 802.11n wireless devices are allowed
to transmit data using 40 MHz.
Enable or disable captive profile for user authentication.
Summary of Contents for AirPremier N DAP-2690
Page 1: ......
