48
DWL-7700AP User’s Manual
D-Link Systems, Inc.
Using the AP Manager
Device Configuration > General (continued)
User Limit
:
This pulldown selection enables or disables Link Integrity. When
Link Integrity is enabled, the wireless segment associated with the
AP will be disconnected whenever the connection between the AP
and the LAN is dropped.
This pulldown selection enables or disables the ability to Telnet into
the selected device(s).
This pulldown selection defines the timeout period during a Telnet
session with the selected device(s).
This pulldown selection enables or disables load balancing. When
you enable load balance you allow several access points to balance
wireless network traffic and wireless clients among the access points
with the same SSID. All the APs that share Load Balancing must
have the same SSID. Assign each access point a different non-
overlapping channel (e.g., 1, 6, 11).
DHCP client
:
There is a pulldown menu to select enabled or disabled. When
enabled, the selected device(s) will function as a DHCP client(s).
This allows them to receive IP configuration information from a DHCP
server. When disabled, the access point(s) must have a static IP
address assigned to them.
Load Balance
:
Enter the number of load balancing users, from 0-64.
Link Integrity
:
Telnet Support
:
Telnet Timeout
:
