D-Link AirPremier DWL-7700AP Manual Download

Page: 101 / 106

101

DWL-7700AP User’s Manual

D-Link Systems, Inc.

Contacting Technical Support

You can ﬁnd software updates and user documentation on the D-Link website.

D-Link provides free technical support for customers within the United States and within
Canada for the duration of the warranty period on this product.

U.S. and Canadian customers can contact D-Link technical support through our web
site, or by phone.

Tech Support for customers within the United States:

D-Link Technical Support over the Telephone:

(877) 453-5465

Monday through Friday 6:00am to 6:00pm.

D-Link Technical Support over the Internet:

http://support.dlink.com

email:[email protected]

Tech Support for customers within Canada:

D-Link Technical Support over the Telephone:

(800) 361-5265

Monday to Friday 8:30am to 9:00pm EST

D-Link Technical Support over the Internet:

http://support.dlink.ca

email:[email protected]

When contacting technical support, please provide the following information:

Serial number of the unit

Model number or product name

Software type and version number

Contacting Technical Support

Summary of Contents for AirPremier DWL-7700AP











































































































Search results

Summary of Contents for AirPremier DWL-7700AP

Reviews:

Related manuals for AirPremier DWL-7700AP

Brands by name

Popular brands

D-Link AirPremier DWL-7700AP, Manual

Search results

Summary of Contents for AirPremier DWL-7700AP

Reviews:

Related manuals for AirPremier DWL-7700AP

Brands by name

Popular brands