52
Appendix 1:
Telnet Configuration
The AP is designed to operate as shipped from the factory without any special
set-up. However, it has many options and parameters that can be changed if users
have special requirements. Most of the management functions can be accessed
using TCP/IP protocol; it can also be configured by Telnet/Console.
Configure the AP using a Telnet session on a wired LAN attached computer. To
use the Telnet session, you can simply open a Telnet window using the IP address
that has been assigned to the AP.
1. Go to
Start
>
Run;
open the
Run
dialog box.
Enter
telnet 192.168.0.50
(the default terminal type of Telnet is VT100; the
default Ethernet IP Address of the AP is
192.168.0.50;
the default wireless IP
Address is
192.168.1.50
).
Click
OK
.
telnet 192.168.0.50
Summary of Contents for AirPremier DWL-1700AP
