Configuration Utility
Link Info
After clicking on the Configuration Utility icon, the
Link Info
screen will
display the following.
(Note: the appearance of the following illustrations may be
slightly different on your computer.)
D-Link
Air
Plus Configuration Utility
Fig. 6.3 This screen shot will be the same for all Windows operating
systems
Status:
Displays the MAC Address of the Access Point that is associated
with the DWL-520+.
SSID:
The Service Set Identifier is the name assigned to the wireless
network. The factory SSID setting is set to
default
.
TxRate:
The factory setting is set to 11 Mbps; however, TxRate settings are
automatically determined by the DWL-520+ depending on the distance from
the access point.
Channel:
Displays the channel information. By default, the channel is set to
6 and selection is automatically determined by the DWL-520+.
Link Quality / Signal Strength:
Displays the Link Quality for the DWL-520+
wireless connection to the access point. The Signal Strength represents the
wireless signal between the access point and the DWL-520+. The
percentage coincides with the graphical bar.
Data Rate:
Displays the statistics of data transmitted and received.
16
