D-Link AirPlus DWL-520+ Manual Download

Page: 10 / 62

Getting Started

Setting Up an Infrastructure Network

Fig. 4.1

Please remember that

D-Link Air

Plus

wireless devices are pre-configured to

connect together, right out of the box, with the default settings.

You will need a broadband Internet access (Cable/DSL)
subscription.

Consult with your Cable/DSL provider for proper installation of the
modem.

Connect the modem to a wireless Broadband router (such as the

D-Link DI-713P

See the

Quick Installation Guide

included with the

router.

Install the drivers for the DWL-520+. See the

Quick Installation

Guide

included with the DWL-520+.

Install the drivers for the wireless network adapter (such as the

D-Link

Air

Plus

DWL-650+

)

into the laptop computer.

See the

Quick Installation Guide

included with the DWL-650+.

Please refer to the following sections of this manual for additional information about

setting up a network:

Networking Basics-

learn how to check your IP Address; share printers and files.

Using the Configuration Utility-

learn the settings you must use on each computer

in your network for successful communication.

Summary of Contents for AirPlus DWL-520+































































Search results

Summary of Contents for AirPlus DWL-520+

Reviews:

Related manuals for AirPlus DWL-520+

Brands by name

Popular brands

D-Link AirPlus DWL-520+, Manual

Search results

Summary of Contents for AirPlus DWL-520+

Reviews:

Related manuals for AirPlus DWL-520+

Brands by name

Popular brands