5. Installing the DWL-520+
Before you start, make sure to turn off your computer
and unplug the power cord.
Note: To avoid damage caused by static electricity, make sure to properly ground
yourself by first touching a metal part of the computer to discharge any static
electricity before working with the DWL-520+.
Installing the PCI Card
•
Remove the back cover of the
computer
•
Install the DWL-520+ carefully and
firmly into an available PCI slot
which is usually “white” or “cream”
colored
•
Secure the DWL-520+ with a
screw
•
Replace the computer’s cover
Fig. 5.1
Installing the Drivers
•
Plug in the power cord and turn
on
your computer
•
The
Found New Hardware
Wizard
screen appears
Fig. 5.2
D-Link Air
Plus
Wireless PCI Adapters
•
Insert the Driver CD into
the CD-ROM drive
•
Close the initial Autorun
screen and continue with
the installation
•
Select
Install from a list
or specific location
(Advanced)
•
Click
Next
12
Note: If Found New Hardware Wizard does not automatically start, go to
Start
>
Settings
>
Control Panel
>
Add Hardware
and follow the
instructions to complete the installation process.
