TITLE
OPERATOR MANUAL
PAGE
PRINTERS
TELEIOS GRANDE G5
7
VERSION
2017DEC04
OUT OF
REVISED BY
MUNOZ, ANTONIO
66
FOR THE USER
d·gen, Inc. - COMPANY PRIVATE (LEVEL 1)
NOT TO BE DISCLOSED TO UNAUTHORIZED PERSONS – PROHIBIDA SU DIVULGACIÓN A PERSONAS NO AUTORIZADAS
DO NOT REPRODUCE WITHOUT AUTHORIZATION – NO REPRODUCIR SIN AUTORIZACIÓN
CARRIAGE
1
Carriage emergency stop safety bar.
The carriage is equipped with 2 emergency bars designed to bring the printer immediately to an
emergency state when crashing against any foreign element on the platen.
2
Subtank’s vacuum valve.
The valve is closed (clockwise) in the following cases:
-
When performing a long purge.
-
When the printer is switched off to keep the vacuum in the print heads.
The valve is opened (counter clockwise) when the printer is on and printing.
3
Carriage stepping motor’s shaft.
This shaft is directly connected to the stepping motor in the carriage. It is used to manually raise/lower
the carriage when the printer is off.
4
Carriage front service cover.
Opened when servicing the print heads. The operator can open this door when is needed to service
the print heads by eliminating the air in its inside by extracting ink through the front service hoses.
5
Printer internal PC’s ON/OFF switch.
To switch on/off the software side of the printer controlled by its internal PC control box.
6
Touch operating panel.
Possible to fully control the printer by using this touch panel. The instructions on how to use this panel
comes in another user’s manual.
7
ON/OFF key type switch.
To turn on/off the hardware side of the printer. Hardware is referred as the electrics, drives and
hydraulics (continuous ink supply system) of the printer.
Summary of Contents for Teleios Grande G5
Page 1: ...OPERATOR MANUAL ...
