19
13. UPDatInG YoUR D-boX HeMC softWaRe
13.1 Update the HEMC’s Internal Software and Motion Codes
the internal software and the Motion Codes library are updated automatically from a remote server. be sure to always have your HeMC
connected to your Internet network. the update will not disturb your current movie viewing and will be uploaded while you are watching a movie.
However, the installation will be performed only if your HeMC is idle for one hour or the next time you turn it on.
13.2 Update the D-BOX HEMC App
When a new version of the D-boX HeMC app is released, download the appropriate app for your operating system.
•
iPad: apple’s app store (
https://itunes.apple.com/ca/app/d-box-hemc/id931473554
).
•
Windows: the D-boX HeMC website (
http://hemc.d-box.com/
).
13.3 Manual Motion Codes Updates
You need to download the package from the D-boX HeMC website (
http://hemc.d-box.com/
) and install it on a Usb key. then plug the Usb
key in your HeMC, and you should observe the following:
1. on the app, an update status message appears at the top right of the main screen.
2. once the update is done (time will depend on the number of files included in the package), your chair will reinitialize by moving
down and then up.
3. the status message should be updated to indicate that the update is complete.
4. the new motion codes are now installed on your HeMC unit.
5. In the HeMC Control app library screen, sort by release date.
6. You should see new movies.
13.4 Manual Internal Software Upgrades
Upon the release of a new firmware version of the HeMC, you need to download the installation package from the D-boX HeMC website
(
http://hemc.d-box.com/
) and install it on a Usb key. then plug the Usb key in, and you should observe the following:
1. on the app, an upgrade status message appears at the top right of the main screen.
2. once the upgrade is complete (after about 30 seconds), your chair will reinitialize by moving down and then up.
3. the status message should be updated to indicate that the upgrade is over.
4. the new upgrade is now installed in your HeMC unit.
