20
Suprex® Ethernet Series - SPX-7200 Network Settings via Telnet
(cont.)
Step 7
Press 1 to enter the Channel 1 menu. Press the enter key 8 times to get to Remote IP Address. Enter the IP address of the
partner unit. If connected to the Central unit, enter the IP address of the Remote unit. If connected to the Remote unit,
enter the IP address of the Central unit. Once the correct IP address has been entered, press the enter key to get through
all of the prompts and back to the Change Setup menu.
Step 8
When all of the necessary parameters have been entered and at the Change Setup menu, press 9 “Save and Exit” to save
the parameters and disconnect from the Central of Remote. “Parameters stored …” will appear.
