Document Number: 002-04721 Rev.*A
Page 71 of 74
MB966B0 Series
Page
Section
Change Results
46
4. AC Characteristics
(1) Main Clock Input Characteristics
Changed MAX frequency for f
FCI
in all conditions
16
→ 8
Changed MIN frequency for t
CYLH
62.5
→ 125
Changed MIN, MAX and Unit for P
WH
, P
WL
MIN: 30
→ 55
MAX: 70
→ -
Unit: %
→ ns
Added the figure (t
CYLH
) when using the external clock
47
4. AC Characteristics
(2) Sub Clock Input Characteristics
Added the figure (t
CYLL
) when using the crystal oscillator clock
48
4. AC Characteristics
(3) Built-in RC Oscillation Characteristics
Added
“RC clock stabilization time”
49
4. AC Characteristics
(5) Operating Conditions of PLL
Changed the Value of “PLL input clock frequency”
Max: 16MHz → 8MHz
Changed the Symbol of
“PLL oscillation clock frequency”
f
PLLO
→ f
CLKVCO
Added Remarks to “PLL oscillation clock frequency”
Added “ PLL phase jitter” and the figure
4. AC Characteristics
(6) Reset Input
Added the figure for reset input time (t
RSTL
)
51
4. AC Characteristics
(8) USART Timing
Changed the condition
(V
CC
= AV
CC
= 2.7V to 5.5V, V
SS
= AV
SS
= 0V, T
A
= - 40°C to +
125°C)
→
(V
CC
= AV
CC
= 2.7V to 5.5V, V
SS
= AV
SS
= 0V, T
A
= - 40°C to +
125°C, C
L
=50pF)
Changed the HARDWARE MANUAL
“MB966B0 series HARDWARE MANUAL”
→
“MB96600 series HARDWARE MANUAL”
52
C
hanged the figure for “Internal shift clock mode”
54
4. AC Characteristics
(10) I
2
C timing
Added parameter,
“Noise filter” and an annotation *5 for it
Added t
SP
to the figure
55
5. A/D Converter
(1) Electrical Characteristics for the A/D
Converter
Added “Analog impedance”
Added “Variation between channels”
Added the annotation
56
5. A/D Converter
(2) Accuracy and Setting of the A/D
Converter Sampling Time
Deleted the unit
“[Min]” from approximation formula of
Sampling time
57
5. A/D Converter
(3) Definition of A/D Converter Terms
Changed the Description and the figure
“Linearity” → “Nonlinearity”
“Differential linearity error”
→
“Differential nonlinearity error”
Changed the Description
Linearity error:
Deviation of the line between the zero-transition point
(0b0000000000←→0b0000000001) and the full-scale
transition point (0b1111111110←→0b1111111111) from the
actual conversion characteristics.
→
Nonlinearity error:
Deviation of the actual conversion characteristics from a
straight line that connects the zero transition point
(0b0000000000 ←→ 0b0000000001) to the full-scale
transition point (0b1111111110 ←→ 0b1111111111).
