CY8CPROTO-062S3-4343W PSoC 62S3 Wi-Fi BT Prototyping Kit Guide, Doc. # 002-28070 Rev. *A
13
Introduction
P10[3]
GPIO
UART CTS
Populate R33 to connect to KitProg3
UART RTS.
P10[4]
GPIO
–
–
P10[5]
GPIO
–
–
P11[0]
GPIO
–
–
P11[1]
Red User LED
–
–
P11[2]
QSPI FLASH CS
GPIO
–
P11[3]
QSPI Flash IO3
GPIO
Remove R2 to isolate from external
memory and use as a GPIO
P11[4]
QSPI Flash IO2
GPIO
Remove R7 to isolate from external
memory and use as a GPIO
P11[5]
QSPI Flash IO1
GPIO
Remove R1 to isolate from external
memory and use as a GPIO
P11[6]
QSPI Flash IO0
GPIO
Remove R3 to isolate from external
memory and use as a GPIO
P11[7]
QSPI FLASH CLK
GPIO
Remove R5 to isolate from external
memory and use as a GPIO
P12[6]
GPIO
–
–
P12[7]
GPIO
–
–
USB_DP
USB-FS device
interface
–
–
USB_DM
USB-FS device
interface
–
–
CYW4343 Pins
BT_UART_TXD
UART interface with
Host MCU (PSoC 6
MCU)
–
Connected to UART RX pin (P3.0) of
PSoC 6 MCU by default. To connect to
KitProg3, remove R64 and populate
R63
BT_UART_RXD
UART interface with
Host MCU (PSoC 6
MCU)
–
Connected to UART TX pin (P3.1) of
PSoC 6 MCU by default. To connect to
KitProg3, remove R53 and populate
R52
BT_UART_CTS
UART interface with
Host MCU (PSoC 6
MCU)
–
Connected to UART RTS pin (P9.2) of
PSoC 6 MCU by default. To connect to
KitProg3, remove R33 (if loaded) and
populate R26
BT_UART_RTS
UART interface with
Host MCU (PSoC 6
MCU)
–
Connected to UART CTS pin (P9.3) of
PSoC 6 MCU by default. To connect to
KitProg3, remove R29 (if loaded) and
populate R24
BT_I2S_WS
I2S Word Select
–
–
BT_I2S_CLK
I2S Clock
–
–
BT_I2S_DI
I2S Data Input
–
–
Table 1-1. Pioneer Board Pinout
(continued)
Pin
Primary On-board
Function
Secondary On-board
Function
Connection details
