CY8CKIT-043 PSoC® 4 M-Series Prototyping Kit Guide, Doc. #: 001-97606 Rev. **
5
Safety Information
Regulatory Compliance
The CY8CKIT-043 PSoC
®
4 M-Series Prototyping Kit is intended for use as a development platform
for hardware or software in a laboratory environment. The board is an open system design, which
does not include a shielded enclosure. This may cause interference to other electrical or electronic
devices in close proximity. In a domestic environment, this product may cause radio interference. In
such cases, take adequate preventive measures. In addition, this board should not be used near any
medical equipment or RF devices.
Attaching additional wiring to this product or modifying the product operation from the factory default
may affect its performance and cause interference with other apparatus in the immediate vicinity. If
such interference is detected, suitable mitigating measures should be taken.
The CY8CKIT-043 PSoC 4 M-Series Prototyping Kit, as shipped from the factory, has been verified
to meet with requirements of CE as a Class A product.
The kit contains ESD-sensitive devices. Electrostatic charges readily
accumulate on the human body and any equipment, and can discharge
without detection. Permanent damage may occur on devices subjected
to high-energy discharges. Proper ESD precautions are recommended
to avoid performance degradation or loss of functionality. Store unused
kit boards in the protective shipping package.
End-of-Life/Product Recycling
This kit has an end-of life five years from the date of manufacture
mentioned on the back of the box. Contact your nearest recycler to
dispose the kit.
