CY8CKIT-043 PSoC® 4 M-Series Prototyping Kit Guide, Doc. #: 001-97606 Rev. **
44
A.2
Programming the PSoC 4 M-Series Prototyping Kit Using
MiniProg3/KitProg
The target board allows you to program the PSoC 4200M device using a MiniProg3 or an external
KitProg via the 5-pin SWD header or the 10-pin JTAG header. To do this, connect wires or a 5-pin
100-mil spaced header to J3 or a 10-pin JTAG header to J5 on the target board. The PSoC 4 M-
Series Prototyping kit supports both power cycle and reset programming modes.
Figure A-1. Connecting CY8CKIT-043 to MiniProg3
Note:
CY8CKIT-002 MiniProg3 is not part of the PSoC 4 M-Series Prototyping kit contents and can
be purchased from the
