CY3280-28XXX Universal CapSense® Controller Development Kit Guide, Spec. # 001-57457 Rev. **
15
Quick Start
2.3.4
Configuring the CSD2X User Module
1. Right click the
CSD2X_1
user module, and select
CSDADC Wizard
.
2. Set the Switches to
5
.
3. Assign the Switches to Pin Number., as in the following table.
4. Click
OK
. The Wizard will close.
5. In the Properties Windows of CSD2X, set the values as shown in
Figure 2-4
.
Figure 2-4. CSD2X User Module Configuration
Switch
Number
Pin Number
SW0
P2[3]
SW1
P2[1]
SW2
P3[3]
SW3
P1[3[
SW4
P3[1]
[+] Feedback
