Quick Start
14
CY3280-28XXX Universal CapSense® Controller Development Kit Guide, Spec. # 001-57457 Rev. **
Figure 2-3. Workspace Explorer
2.3.3
Configuring LED and EzI2Cs User Modules
1. Select
LED_1
user module in the Workspace Explorer window.
2. Set the port to
Port_1
, the pin to
Port_1_2
, and Drive to
Active Low
in the Properties - LED_1
window.
3. Select
LED_2
user module in the Workspace Explorer window.
4. Set the port to
Port_0
, the pin to
Port_0_3
, and Drive to
Active Low
in the Properties - LED_2
window.
5. Select
LED_3
user module in the Workspace Explorer window.
6. Set the port to
Port_0
, the pin to
Port_0_1
, and Drive to
Active Low
in the Properties - LED_3
window.
7. Select
LED_4
user module in the Workspace Explorer window.
8. Set the port to
Port_2
, the pin to
Port_2_7
, and Drive to
Active Low
in the Properties - LED_4
window.
9. Select
LED_5
user module in the Workspace Explorer window.
10.Set the port to
Port_2
, the pin to
Port_2_5
, and Drive to
Active Low
in the Properties - LED_5
window.
11. Select
EzI2Cs_1
user module in the Workspace Explorer window.
12.Set the Slave Addr to
67
, and Address_Type to
Statics
.
13.Set ROM_Registers to
Disable
.
14.Set Auto_Addr_Check to
Enable
.
15.Set the I2C Clock to
100K Standard
.
16.Set the I2C Pin to
P1[0]-P1[1]
.
User Module
Port
Pin
Drive
LED_1
Port_1
Port_1_2
Active Low
LED_2
Port_0
Port_0_3
Active Low
LED_3
Port_0
Port_0_1
Active Low
LED_4
Port_2
Port_2_7
Active Low
LED_5
Port_2
Port_2_5
Active Low
[+] Feedback
