Kit Operation
CY3677 Evaluation Kit User Guide, Doc. No. 002-12185 Rev. *D
19
10. After functional programming, the frequency values of the current
.cpj
are displayed in the following fields (see
Figure
3-10
):
Profile 0 (MHz)
,
Profile 1 (MHz)
,
Profile 2 (MHz)
, and
Profile 3 (MHz)
. You can change any of the frequencies
in these fields. To make the changes effective, click
Large change update
. The expected output frequency will appear
on the oscilloscope.
Note:
Large change programming refers to the case where the frequency is changing more than ± 500 ppm.
Figure 3-10. Evaluation of Other Frequencies through Large Change Update
11. If you want to change the frequency to less than ±500 ppm, fill in the desired ppm in the
Small change (ppm)
field,
Select FS profile and click on
Small change update
. The settings are shown in
Figure 3-11
.
Figure 3-11. Evaluation of Other Frequencies through Small Change Update