Cypress CY3674, User Manual

Page: 7 / 117

EZ-USB Development Kit User Guide, Doc. # 001-66390 Rev. *D 7
1. Introduction
1.1 Introduction
The EZ-USB
®
Development Kit (DVK) is a good starting point for developing an EZ-USB based
product. The DVK includes everything you will need to get started: a development board, example
firmware, a Microsoft-certified signed generic USB device driver (cyusb.sys), documentation, and
assorted tools. This section provides an overview of the DVK. The software installation of the kit
includes additional help files and documentation more specific to the various components in the kit.
The DVK is designed to work with the EZ-USB FX2LP and FX1 chips. FX1 is a full-speed only ver-
sion of FX2LP. Other than the absence of a high-speed transceiver, FX1 is identical to FX2LP.
Except where distinction is required, both chips are generically referred to as EZ-USB throughout
this document.
1.2 Kit Contents
The following list shows the components supplied in the EZ-USB DVK. They represent most of the
development tools required to build a USB system.
1.2.1 Hardware
■
EZ-USB advanced development board
■
EZ-USB prototyping board (breadboard)
■
USB A-to-B cable
■
RS-232 cable
■
Software installation CD-ROM
■
Three samples: EZ-USB FX1 IC (CY7C64713-128AXC) for the CY3674 kit and EZ-USB FX2LP
IC (CY7C68013A-128AXC) for the CY3684 kit.
■
Quick start guide booklet
1.2.2 Software on CD-ROM
■
EZ-USB firmware library and firmware frameworks
■
Firmware sample code
■
Microsoft-certified signed Cypress generic USB driver (3.4.5.000) for Windows XP, Vista, and 7
OS platforms.
■
Cypress USB class library (CyApi)
■
Cypress USB console
■
SuiteUSB 3.4.7 Development tools for Visual Studio
■
Cypress GPIF Designer
■
Cypress firmware and Keil monitor download driver sample
■
EZ-USB documentation and help files