Cypress CY3674, User Manual

Page: 48 / 117

48 EZ-USB Development Kit User Guide, Doc. # 001-66390 Rev. *D
Cypress USB Drivers for EZ-USB Kits
Verify if the xx.spt file is located in the destination directory. This tool can only generate a script but
cannot play the script. Using Cyconsole or Controlcenter , the generated script file can be loaded
and played to download the firmware inside the script.
6.3.1.2 Script File Generation and Play using CyConsole
Open the Cyconsole tool located at
C:\Cypress\Cypress Suite USB 3.4.7\CyConsole
.
Click on
C:\Cypress\Cypress Suite USB 3.4.7\CyConsole
. Alternately, the tool can be
accessed at Windows Start > All Programs > Cypress > Cypress SuiteUSB 3.4.7 . Follow these
steps to generate and play the script.
Figure 6-5. Script Generation and Download Option in Cyconsole
1.Connect a USB A-to-B cable between the Windows PC USB Host port and the EZ-USB FX1/
FX2LP board J1 connector. The board should have switch SW2 with the NO EEPROM option
selected.
2.The EZ-USB FX1/FX2LP enumerates with the default Fuse ROM VID/PID.
3.Select the Record Script button
4.In the options menu, select EZ-USB Interface . Select Download in the new pop-up window and
browse to Bulkloop.hex at
<Installed_directory>\<Version>\Firmware\Bulkloop