CYP QU-28S-4K22 Operation Manual Download Page 4

Page: 4 / 43

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate

this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this

equipment:
•

Always follow basic safety precautions to reduce the risk of fire,

electrical shock and injury to persons.

•

To prevent fire or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

•

Never spill liquid of any kind on or into this product.

•

Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts inside

the unit.

•

Do not attach the power supply cabling to building surfaces.

•

Use only the supplied power supply unit (PSU). Do not use the PSU if

it is damaged.

•

Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

•

To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufficient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO.

DATE

SUMMARY OF CHANGE

v1.00

24/05/1018

First release

Summary of Contents for QU-28S-4K22












































Search results

Summary of Contents for QU-28S-4K22

Reviews:

Related manuals for QU-28S-4K22

Brands by name

Popular brands

CYP QU-28S-4K22, Operation Manual

Search results

Summary of Contents for QU-28S-4K22

Reviews:

Related manuals for QU-28S-4K22

Brands by name

Popular brands