26
COMMAND
DESCRIPTION & PARAMETERS
GET OUT AUTO SWITCH
Shows the current automatic input source switching setting.
SET OUT GROUP MODE N1
Enable or disable Group Mode.
Available values for
N1
:
ON
[Group Mode Enabled]
OFF
[Group Mode Disabled]
GET OUT GROUP MODE
Show the current Group Mode setting
SET OUT N1 CONVERT N2
Sets the 4K source conversion mode to use on Output N1.
N1
= A ~ H
[Output Port]
Available values for
N2
:
0
[Bypass, No Conversion]
1
[Convert to YUV 4:2:0]
2
[Convert to 1080p]
3
[Auto Conversion]
Note: 4K conversion is only available with 4K sources.
GET OUT N1 CONVERT
Show the 4K source conversion mode used by Output N1.
N1
= A ~ H
[Output Port]
GET OUT N1 HPD
Show the current hot-plug status of Output N1.
N1
= A ~ H
[Output Port]
GET OUT N1 RSENSE
Show the current receiver sense status of Output N1.
N1
= A ~ H
[Output Port]
