45
COMMAND
Description and Parameters
get ir N1 extension N2 name
Show the current name for the specified device’s Extension mode
remote control function button
N2
.
Available values for
N1
:
1~4
[HDMI Input device]
A
[HDMI Output device]
N2
= 32, 34, 39~60
[IR button function number]
set ir bypass
N1
Enable or disable the IR bypass and auto-IR routing mode.
Available values for
N1
:
ON
[Bypass enabled]
OFF
[Bypass disabled]
Note: When IR Bypass is enabled, unit-generated IR commands will be
delayed by 100ms to avoid conflict with the bypassed IR command.
get ir bypass
Show the current state of the IR bypass mode setting.
set ir channel N1
Set the channel for the IR inputs to use.
N1
= 0~3
[IR channel]
Note: The IR channel of the unit and the dedicated IR remote control
must match in order for the unit to be controlled.
get ir channel
Show the current channel used by the IR inputs.
set control system default
Reset the IR control system settings to their factory defaults and clear
all stored IR commands.
