24
6.6.7 System Settings Tab
This tab provides system information, power control, network configuration
options, system configuration backup/restore/reset, and firmware update
functions.
1) Serial Number/Firmware Version:
Displays the unit’s serial number and
current firmware version.
2) Power:
Provides control over the unit’s power state.
Control:
Press this switch to toggle the unit’s power between ON and
OFF (standby mode).
Note: While in standby mode the unit’s WebGUI, Telnet and RS-232
controls are still active.
Auto Standby:
Set the length of time (in minutes) to wait before
automatically putting the unit into standby mode if there are no valid
input signals detected. Setting this to “0” will disable the feature.
3) Keypad Lock:
Enable or disable the front panel key lock. When enabled,
the use of all front panel buttons will be disabled.
