19
6.6.5 IR Control Tab
This tab provides control over the handling of all IR commands stored within
the unit, including learning commands to be assigned to the buttons on
the IR remote/App for each input and output, enabling the Advanced and
Extension button sets, renaming each button, as well as saving/loading the
IR configuration for each source or sink to/from a PC file. The app’s behavior
may also be simulated, allowing each button to be tested to ensure the
proper IR signal is transmitted.
1) Source 1~4/Sink A Buttons:
Press the button of the Source or Sink that
you wish to configure the IR commands for.
Note: All settings below are individually set and stored for each Source or
Sink.
APP Simulation:
Enable or disable simulating the app with the
buttons below to allow for the convenient testing of learned codes.
When enabled, pressing any of the remote buttons on this web page
will transmit the IR command defined within that button to the current
Source or Sink.
Name:
Allows renaming the current Source or Sink’s remote for easy
identification. Type the new name in the space provided. The name
can be up to 32 characters long. Click the “Save” button to confirm the
change.
