CYP CH-331H-RX, Operation Manual

Page: 28 / 44

23
6.7.4 Receiver Specific Commands
COMMAND
Description and Parameters
set_edid_copy N1

Copy and use the EDID of the connected display.
Available values of
N1 :
0 [Disabled]
1 [Enabled]
get_edid_copy

Show the state of the EDID copy function.
set_rx_channel N1 {N2}

Select a VoIP transmission channel to route to this Receiver and,
optionally, which content from the channel to route.
N1 = 0 ~ 255 [VoIP channel]
Available values for N2 (Optional):
V [Video]
A [Audio]
S [Serial]
I [IR]
Note: Omitting N2 will route all content from the specified
channel.
get_rx_channel {N1}

Show the currently selected VoIP transmission channel(s).
Available values for
N1 (Optional):
V [Video]
A [Audio]
S [Serial]
I [IR]
Note: Omitting N1 will show the channel source of all content
types.