CYP CDPS-41SQN, Operation Manual

Page: 30 / 44

25
This will connect us to the unit we wish to control. Type “help” to list
the available commands. Type “IPCONFIG” to list all IP configurations.
Type “IPMODE” to put the unit into static IP/DHCP mode. For a full list
of commands, see section 6.6.
Note:
• Commands will not be executed unless followed by a carriage
return. Commands are not case-sensitive.
• If the IP address is changed then the IP address required for WebGUI
or Telnet access will also change accordingly.
• Consult the OSD (“Ethernet Steup” menu) to view the current IP
settings if necessary. An Ethernet re-link is required after every IP
change.