CYP CDPS-41SQN, Operation Manual

Page: 31 / 44

26
6.8 WebGUI Control
All primary functions of this unit are controllable via the built in
WebGUI. This control is presented across 8 separate tabs, including
Image Adjust, Image Swap, Output Resolution, Windows Setup, OSD/
LOGO Settings, Window Convert, Chromakey Setup, and Ethernet.
Depending on the unit’s current operation mode, some tabs will be
disabled. The individual functions will be introduced in the following
sections.
To access the WebGUI, open a web browser on a PC/Laptop that
is connected to an active network and type the unit’s IP address
(available from the OSD menu) into the web address entry bar.
Common Functions:
The top section of each tab is dedicated to presenting a standard
selection of information and basic controls including channel & output
information, unit status, source, and window selection, and favorite
preset storing.
(1) Information-In: Displays the detected resolution for each of the 4
window channels.
(2) Information-Out: Displays the current output resolution and Window
Mode.
(3) Status: Displays current input to channel mapping and provides a
control to turn the unit on/off (stand-by).
(4) Source: Provides controls to set the Window Mode (A~H, Fav1~4),
set the input to channel mapping, select the live audio source or
to mute the output audio.
(5) FAV. Store/Factory: Provides controls to store the current window
channel sizes and positioning as a user Favorite (1~4). Click on
the “Factory Default” button to reset the entire unit to the factory
defaults.