CYP AVIP-P5104T-B1C, Operation Manual

Page: 19 / 36

14
6) VOIP Out Auto Mode: Enable or disable the AVoIP streaming
output’s automatic source selection mode. When enabled, the unit will
automatically switch the input routed to the AVoIP output whenever a new
source is detected or if the current source is lost.
INFORMATION
2ND LEVEL
3RD LEVEL
Resolution [Current Source Resolution]
Status TRANSMITTER
FW Version [Current Firmware Version]
IP [Current IP Address]
MAC [Unit’s MAC Address]
SN [Unit’s Serial Number]
1) Information: Shows details of the unit’s current status including detected
source resolution, streaming direction status, firmware version, IP
address, MAC address, and serial number.
USB INFORMATION
2ND LEVEL
3RD LEVEL
IP Mode [Unit’s USB IP Mode]
IP [Unit’s USB IP Address]
MAC [Unit’s USB MAC Address]
Pair MAC 1~7 [USB Mac Addresses of
Connected USB Devices]
1) USB Information: Shows status details of the unit’s USB mode and
current USB connections.
FACTORY SETTING
2ND LEVEL
3RD LEVEL
Are you sure? NO
Yes
1) Factory Setting: Selecting YES will reset the unit’s settings back to their
factory defaults.