CynkoMet T-104, Instructions For Use And Operation

Page: 85 / 128

Cynko Met
T-104/6
85
have the possibility of moving, and the trailer when moving is not
tilting. If there is a possibility of damage or frayed belts against
components of the trailer, put washers in sensitive areas.
In order to avoid compression of the walls inside the
trailer, when loading using a crane, use a special traverse, in which
the places of hooking the belts are spaced wider than the total
width of the trailer.
The trailer should be attached firmly to the platform of the
transport mean with belts, chains, lashing or other fastening
means fitted with a tightening mechanism. The fasteners should
be hooked in the designated eyebolts Fig.21 or permanent
structural elements of the trailer (cross-braces, crossbars, etc.).
Transport handles are welded to the chassis of the top frame, one
pair on each side of the trailer. Use certified and technically
efficient fastening means. Frayed belts, cracked mounting
brackets, opened or corroded hooks or other damage may
disqualify the given mean for use.
Under the wheels of the trailer chocks, it is advisable to
put wooden beams or other elements without sharp edges,
preventing the machine from rolling. Trailer wheels chocks must
be attached to the loading platform of the car so as to prevent
their shifting.
CAUTION!
CAUTION!
During car transport, the parking brake should
be used in the trailer (parking brake action is
described in section 4.2.4).