CynkoMet T-104, Instructions For Use And Operation

Page: 46 / 128

Cynko Met
T-104/6
46

Set the drawbar hitch anchorage on the height of the transport
hitch of the tractor (this can be achieved by adjusting the drawbar
spring tension).

Reversing the tractor, connect the drawbar end with the upper
transport hitch of the tractor (if in the agricultural tractor, an
automatic coupler is used, ensure that the aggregate operation
has been completed correctly and the drawbar anchorage is
secured).

Stop the tractor engine.

Install and secure the hitch pin against falling out or check the
automatic hitch mechanism.
 Connect with the electric, hydraulic and brake installation wiring
with the trailer.
 Release the parking brake of the machine.
CAUTION!
CAUTION!
At the time of the coupling, unauthorized people
cannot be between the trailer and the tractor. The
operator of the tractor, when connecting the
machine should be particularly careful when
working and make sure that in the course of
coupling, other people are not in the danger zone.
When connecting the hydraulic hoses to the
tractor, pay attention that the hydraulic system of
the tractor and the trailer are not under pressure.
When coupling ensure adequate visibility.
Connecting the trailer with a hitch other than a
transport hitch is unacceptable because it threatens
the safety of road traffic
After completion of the machine coupling, check
the security of the hitch.