51
OPERATION
Limiting the operating time
In order to increase efficiency, the induction
hob is fitted with a operating time limiter for
each of the cooking zones. The maximum
operating time is set according to the last
heat setting selected.
If you do not change the heat setting for a long
time (see table) then the associated cooking
zone is automatically switched off and the
residual heat indicator is activated. However,
you can switch on and operate individual cook-
ing zones at any time in accordance with the
operating instructions.
Automatic warm-up function
● Touch sensor (
5
) to activate the selected
cooking zone
● Then touch "+" (
2
) or "-" (
4
) to set the
desired heat setting in the 1-8 range and
then touch sensor (
5
) again.
● The display will alternate between the
letter A and the heat setting.
After a certain time of operation at boosted
power, the cooking zone switches back to
the heat setting set, which will be shown
on the display.
If a pot is lifted from the cook-
ing zone and replaced before the
warm-up countdown is completed,
the warm-up function will resume
and countdown will continue until
completed.
Cooking heat
setting
Maximum op-
erating time
(hours)
8
1
8
2
8
3
5
4
5
5
5
6
1,5
7
1,5
8
1,5
9
1,5
P
0,16
Cooking heat
setting
mocy grzejnej
The duration of
the automatic
warm-up function
(minutes)
-
1
0,8
2
1,2
3
2,3
4
3,5
5
4,4
6
7,2
7
2
8
3,2
