Operating Instructions | GPM 450 SPEED
14
Place 2 – 3 sheets to be processed on the feeding table. Push the sheets to the stainless steel plate, so
that they are collinear (fig. 9). This ensures the sheets are perpendicular to the tool. Push the side guides
(3) towards each other, so that there is a minimum gap between them and the sheets. Caution! This
adjustment has a great impact on correct paper feeding into the machine. If the processed paper is not
perfectly perpendicular, correct this inaccuracy by skewing the side guides (3) using the angle regulation
screw (17). Lock the adjusted position with the locking bolts of the side guides (21). Correct and incorrect
procedure is shown in figures 9 and 10.
Fig. 9: Correctly prepared table – the sheet has been pushed to the stainless steel plate
Fig. 10: Incorrectly prepared table – the sheet has not been pushed to the stainless steel plate along its whole length
