M5-CYG4P-M-01_Iss5.doc
Cygnus 4+ Operating Manual
55
For general metal corrosion measurement the 0.1 mm
resolution setting is recommended.
To change the Resolution setting:
1.
Access the Menu and scroll down
to the ‘Measurement’ group.
Then scroll right and select
‘Resolution’.
Press the Ok/Select key to open
the ‘Resolution’ function
2.
Use the Up and Down keys to
select the required Resolution
3.
Press the OK/Select key to save.
Or press the X/Cancel key to exit
without saving.
Limit Functions
The gauge has a Limit function that can be used to;
•
Give visual indication of measurements between minimum,
reference and maximum limits.
•
Vibrate Alert the operator if measurements are outside the
minimum or maximum limits
