8
Copyright August 2013 Cyclotricity Ltd
Water
Your electric bicycle is rain and splash resistant and can be used in
all weathers. The electrical components of the vehicle, such as
motor, battery, and controller, must not be submerged in water.
Maintenance
WARNING
:
Do not attempt to open the casings of the battery or
motor as it could be dangerous and all warranties will become void.
If you experience problems, refer to the troubleshooting guide in
this manual or ask your local dealer.
1-
The brake leavers should lock the wheels when
compressed half way between their open position and
touching the handle bars. If not please adjust following the
instructions in this manual or seek assistance of a local
bike service shop.
Warning:
Any replacement forks must have the same rake
and same tube inner diameter as the originally fitted to
the bicycle.
2-
Disc brake pad wear and replacement. Remove the brake
pads and check them for wear. If the friction material is
less than 1mm thick then they need to be replaced. Rear
brake blocks must be replaced if the grooves are no longer
visible.
3-
Every three months lubricate the brake lever pivots, the
gears and chain with light oil and the brake arm bushes
(not the brake blocks or disc pads) with a little grease.