17
Copyright August 2013 Cyclotricity Ltd
Push aided mode
-
It is possible to use the 6km/h assistance mode while
walking your bike. To do so, press and hold the 6km/h
button, the push aided indicator will start flashing. The
bike will run at no more than 6km/h as you walk the bike
along.
-
Release the 6km/h button to suspend this function.
User Setup
You will need to configure the following functions on your device:
d.
Maximum speed.
e.
Wheel diameter (12”-28”).
Speed Setup
-
Press the on/off button to switch the device on.
-
Press and hold both on/off and MODE buttons
simultaneously for 3-5 seconds. This will take you into the
LED setup state.
-
Once you enter the setup state, the LOW indicator as well
as the speedometer indicators will flash. Press the on/off
or MODE buttons to increase/decrease the maximum
speed parameter (please note that 25km/h is the
maximum legal speed limit allowed on the road in the
UK/EU). Each light on the speedometer indicators equates
to 1km/h.
-
You can save this setting and exit the setup state by
holding down the MODE button. Alternatively, you can