3
Copyright August 2013 Cyclotricity Ltd
Part 1 – Before first time use
The bike has been 90% readily assembled for you. To save space in
the carton, it was packed with the front wheel, handlebars, pedals
and possibly the seat posts detached. If you are not familiar with
how to perform these fittings, we strongly recommend you seek
assistance of a professional bike service shop as damages caused by
wrong assembly is NOT covered by your warranty. A bike service
shop will also adjust your brakes and gears for you for best
performance.
On the other hand, if you choose to perform these tasks by
yourself, you will need the following tools:
1-
5mm hex key
2-
10mm wrench
3-
Screw driver
4-
Pump
Although your Cyclotricity bike has been thoroughly tested, it is
important that you perform some basic checks before first time
use. You are also recommended to perform these checks regularly
in the future to protect yourself and your Cyclotricity bike:
1-
Check brakes and brake isolators are functioning properly.
2-
Check all other nuts, bolts and fixings are properly
tightened, pay particular attention
to the motor fixings. You will
notice that there is an unusual
washer with a small axle around
the motor spindle (called torque