background image

17

V1.3

Model

PR-250T

Light source:

350 watts RGBAYC LED

 

       

Technical specifications

 

                                                   

Control pr

otocols:  

                           

Net weight:

C

olor:

IP rating:

O

perating temperature:

Rotary, DMX,RDM, Artnet 
2, 8,12 CHs

AC100

-240V/50-60Hz

3 pin XLR In/Out male and female
PowerCon In/Out
745 x 294 x 294mm
8.7 Kg (including lens)

Black
20

-5°C/45°C

Control channels:
Input voltage:
DMX connections:
Power connections:
Dimensions:

LED life expectancy:

50,000 Hrs.

CRI:

85

TLCI:

95

Manual zoom
Zoom range: 

18° to 38° (optional 5°-10° or 9°-18°profile lenses)

Light output

5000 Lux @ 5m @ 18°

Optional Fresnel lens adapter 25°-50° (PMMA)
5 Dimmer curves
Color mixing: 

RGBAYC

White temperature macros
Strobe

Video flicker free with selectable PWM

Intelligent temperature control

Silent operation

Please note: All information is subject to change without prior notice. 

24.06.2019

www.cyclopslighting.com

SOURCE

    Light source: 350 watts RGBAYC LED

    LED life expectancy: 50, 000 Hrs.

    CRI: 85

    TLCI: 95

OPTICAL SYSTEM

    Manual zoom

    Zoom range: 18° to 38° (optional 5°-10° or 9°-18° profile lenses)

    Light output: 5000 Lux @ 5m @ 18°

    Optional Fresnel lens adapter 25°-50° (PMMA)

KEY FEATURES

    5 Dimmer curves

    Color mixing: RGBAYC

    White temperature macros

    Strobe

    Video flicker free with selectable PWM

    Intelligent temperature control

    Silent operation

CONTROL & PROGRAMMING

    Control protocols: Rotary, DMX, RDM, Artnet

    Control channels: 2, 8, 12 CHs

ELECTRICAL

    Input voltage: AC100-240V/50-60Hz

CONNECTIONS

    DMX connections: 3 pin XLR In/Out male and female

    Power connections: PowerCon In/Out

PHYSICAL

    Dimensions: 745 x 294 x 294mm

    Net weight: 8.7 Kg (including lens)

    Color: Black

    IP Rating: 20

    Operating temperature: -5°C/45°C

Summary of Contents for PR-350S


















Reviews: