4
Version 1.0
Fxiture overview
Installation
Read ‘Safety information’ before installing the fixture
The fixture is designed for indoor use only and must be used in a dry location with adequate ventilation� Ensure that
none of the fixture’s ventilation slots are blocked�
Fasten the fixture to a secure structure or surface� Do not stand it on a surface or leave it where it can be moved
or fall over� If you install the fixture in a location where it may cause injury or damage if it falls, secure it as directed
in this user manual using a securely anchored safety cable that will hold the fixture if the primary fastening method
fails�
Fastening the fixture to a flat surface
The fixture can be fastened to a hard, fixed, flat surface that is oriented at any angle� Ensure that the
surface and all fasteners used can support at least 10 times the weight of all fixtures and equipment to
be installed on it�
Fasten the fixture securely� Do not stand it on a surface or leave it where it can be moved or fall over�
If you install the fixture in a location where it may cause injury or damage if it falls, secure it as directed
below with a securely anchored safety cable that will hold the fixture if the primary fastening method
fails�
Mounting the fixture on a truss
The fixture can be clamped to a truss or similar rigging structure in any orientation� When installing the
fixture hanging vertically down, you can use an open-type clamp such as a G-clamp� When installing in
any other orientation, you must use a half-coupler clamp that completely encircles the truss chord�
To clamp the fixture to a truss:
1� Check that the rigging structure can support at least 10 times the weight of all fixtures and
equipment to be installed on it�
2� Block access under the work area�
3� Fold the legs of the mounting bracket together and bolt a rigging clamp securely to the mounting
bracket� The bolt used must be M12� It must pass through both mounting bracket legs and be
fastened with a self-locking nut�
4� Working from a stable platform, hang the fixture with its clamp on the truss and fasten the clamp
