10
Version 1.0
unscented tissue or cotton swab moistened with glass cleaner or distilled water�
5� Check that the fixture is dry before reapplying power�
Fuse Replacement
This fuse is located in a fuseholder next to the MAINS OUT socket on the connections panel�
To replace a fuse:
1� Disconnect the fixture from power and allow it to cool for at least 10 minutes�
2� Unscrew the cap of the fuseholder and remove the fuse� Replace with a fuse of the same size and
rating only�
3� Reinstall the fuseholder cap before reapplying power�
Troubleshooting
Listed below are a few common problems that you may encounter, with solutions�
The fixture does not work, no light
• Check the connection of power and main fuse� Be sure the external fuse has not blown�
• Measure the mains voltage on the main connector�
No response to the sound
• Make sure the fixture does not receive DMX signal�
• Low frequencies (bass) should cause the unit to react to sound�Tapping on the microphone, quiet or
high pitched sounds may not activate the unit�
• Check the sound sensitivity level� Make sure it is not set to a low sensitivity level�
