5
Version 1.0
securely�
5� Secure the fixture with a safety cable as directed below�
Securing with a safety cable
Secure the fixture with a safety cable (or other secondary attachment) that is approved for the weight of
the fixture so that the safety cable will hold the fixture if a primary attachment fails�
Loop the safety cable through the eyebolt in the back of the fixture and around a secure anchoring
point� Do not loop the safety cable around the fixture’s mounting bracket only, as this will leave the
fixture unsecured if it separates from the bracket�
DMX-512 connection/connection between fixtures
Occupation of the XLR-connection:
1. Group
2. Signal (-)
3. Signal (+)
DMX OUT
1. Group
2. Signal (-)
3. Signal (+)
DMX IN
If you are using controllers with this occupation, you can connect the DMX-output of the controller
directly with the DMX-input of the first fixture in the DMX-chain� If you wish to connect DMX-controllers
with other XLR-outputs, you need to use adapter-cables�
Building a serial DMX-chain:
Connect the DMX-output of the first fixture in the DMX-chain with the DMX-input of the next fixture�
Always connect one output with the input of the next fixture until all fixtures are connected�
DMX-512 connection with DMX terminator:
For installations where the DMX cable has to run a long distance or is in an electrically noisy
environment, such as in a discotheque, it is recommended to use a DMX terminator� This helps in
preventing corruption of the digital control signal by electrical noise� The DMX terminator is simply an
XLR plug with a 120 resistor connected between pins 2 and 3, which is then plugged into the output
XLR socket of the last fixture in the chain�
Caution:
At the last fixture, the DMX-cable has to be terminated with a terminator� Solder a 120
resistor between Signal (–) and Signal (+) into a 3-pin XLR-plug and plug it in the DMX-output of the
last fixture�
Connection with the mains:
The LEDE 100B is equipped with auto-switching power supply that automatically adjusts to any 50-
60Hz AC power source from 100-240 Volts�
This fixture must be earthed� To use the fixture, a plug must be fixed�
The correct assembly of a sufficient plug may be done by professional persons only�
Connect the device to the mains with the enclosed power supply cable�
The occupation of the connection cables as below:
Cable color
Connection
International
Brown
Live
L
Blue
Neutral
N
