EDGE
Page 4
CVHC-01-01/02/03 Revision L Instruction Manual Revision-5 (13-01-2019)
AS/NZS 2063-2008 +A1:2009
Australia/New Zealand Bicycle Helmet Safety Standard
CAUTION
1 CAUTION:
Cyclevision has been designed and tested to withstand moderate speed water injection at IP 67 level, this
is a mandatory condition for weatherproofing the device, however the helmet has not been designed for nor suitable
for, water sport, or water-based activity do not swim with or submerge your Cyclevision helmet
2 CAUTION:
Your Cyclevision helmet can live stream vision to your mobile smartphone screen (when mounted on
the bicycle handlebars) for use as an electronic rear view mirror
The electronic rear vision as seen through the Cyclevision App has a characteristic
called ‘video latency’ (
Being:
The delay from the time the image has been captured & processed by the helmet PCBA, Wi-Fi to your mobile
smartphone, reprocessed and displayed as an image on your smartphone screen) of approximately 0.3ms
(milliseconds). Therefore, approaching objects as viewed through the Cyclevision App from your mobile device
screen may in reality be closer than they appear as a display on your smartphone screen.
3 CAUTION:
The Cyclevision App has a ‘Mirror Mode’ setting (discussed in detail under App settings)
The mirror mode ensures that vision of rearwards approaching and passing traffic is in fact approaching and
passing the rider on the correct side (as viewed on their mobile smartphone screen) i.e vehicles which appear to
be approaching the rider on their right side, do in fact pass the rider on the right side (or vis-versa)
By default, the Cyclevision App ‘mirror image mode’ is selected
ON
. This is so the user can avail of this system
immediately without the need to enter into the App settings. The user must enter the App settings to turn the mirror
mode OFF and as such doing so (turning Mirror mode OFF) releases Cyclevision from any liability from any event
occurring from such action
4 CAUTION:
Do not use the Cyclevision electronic rear vision as your ‘only point of reference’ when crossing traffic
lanes, visually and physically check actual traffic conditions at all times
CUSTOMER SUPPORT
For customer support, visit: www.cyclevision.com.au and access the trouble shooting guide or email us at:
or
and we will only be too happy to help out
PRODUCT GUARANTEE
The manufacturer makes every effort to ensure that its products are manufactured without any defect. However, in
the rare event of defects due to faulty workmanship or materials, we guarantee to repair or replace the product, or
any part thereof, free of charge. (apart from postage) The guarantee is granted to the original purchaser only and
is valid for one year from the date of purchase indicated by the sales receipt.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure
To avail of the repair or replacement program please email Cyclevision detailing the fault, with a copy of the sales
receipt, if the fault is then deemed non-repairable by Cyclevision, simply return (post) the faulty helmet to
Cyclevision at the address below (at the cost of the user) a replacement helmet will be immediately forwarded
free of charge to the user after receipt of the faulty helmet
Do not attempt to open your Cyclevision helmet camera housings, unauthorised tampering may destroy sensitive
electronics
This guarantee does not apply if the product is altered or repaired or otherwise tampered with by unauthorised
persons and/or is used
other than in accordance with manufacturer’s instructions and/or is subject to other than
reasonable use of a product of its nature. This guarantee in no way affects your rights under the statutory law.
If you think your product might be faulty, contact Cyclevision Pty Ltd at
or
Or contact us on the number provided
