CycleOps Joule 3.0 User Manual Download

Page: 65 / 84

Joule 3.0 User Guide page 65

Chapter 7: Setting Up CycleOps Joule 3.0 ™

Setting Up Joule™ Data

Firmware version denotes the revision Joule 3.0 is operating on. Reference www.cycleops.com for
the latest version.

Firmware Version:

01:00

Odometer

>
>

Reset Odometer

Power Avg (sec):

Designed in:

Madison, WI by

Saris Cycling Group

800-783-7257

>
>

1
Speed Avg (sec):

Language:

English

Units:

English

Pair New Sensor

Back

INT

CPU Data

12356

1. Press and release [MODE] until

mode is displayed.

2. Press [JOYSTICK} up/down to highlight

Setup Joule

. Press [JOYSTICK] in and release to select

Setup Joule

3. Press [JOYSTICK] up/down to highlight

Joule Data

. Press [JOYSTICK] in and release to select

Joule Data

4. Press [JOYSTICK] up/down to view Joule 3.0 fi rmware version. Check for the latest updates through Power-
Agent software.

5. Press [JOYSTICK] up/down to highlight

Odometer.

Press [JOYSTICK] in and release to select

Odometer.

The odometer can be changed for a desired start point and can be reset at any time. Press {JOYSTICK] up/
down to change. Press [JOYSTICK] in and release to save changes.

Summary of Contents for Joule 3.0





















































































Search results

Summary of Contents for Joule 3.0

Reviews:

Related manuals for Joule 3.0

Brands by name

Popular brands

CycleOps Joule 3.0, User Manual

Search results

Summary of Contents for Joule 3.0

Reviews:

Related manuals for Joule 3.0

Brands by name

Popular brands