Joule 3.0 User Guide page 60
Chapter 7: Setting Up CycleOps Joule 3.0 ™
Setting Up Display
Joule 3.0 display can be customized for viewing preferences. PowerAgent software may also be
used to change settings.
1. Press and release [MODE] until
Menu
mode is displayed.
2. Press [JOYSTICK] up/down to highlight
Setup Joule
. Press [JOYSTICK] in and release to select
Setup Joule
.
3. Press [JOYSTICK] up/down to highlight
Display
. Press [JOYSTICK] in and release to select
Display.
4. Press [JOYSTICK] up/down to highlight
Backlight Level
. Press [JOYSTICK] in and release to select
Backlight
Leve
l.
5. Press [JOYSTICK] up/down to change
Backlight Level
from 1-10. Press [JOYSTICK] in and release to save
settings. Note: Backlight Level10 is the brightest level, 1 is the dimmest. Press [JOYSTICK] in and release to save
changes.
6. Press [JOYSTICK] up/down to highlight
Backlight Timeout
. Press [JOYSTICK] in and release to select
Back-
light Timeout
.
7. Press [JOYSTICK] up/down to change
Backlight Timeout
from Off, 2 seconds, 5 seconds, 30 seconds, 1 minute
or On. Note: the backlight will turn on after any button is pressed and remain on for the duration of the
Back-
light Timeout
setting. Press [JOYSTICK] in and release to save changes.
8. Press [JOYSTICK] up/down to highlight
Contrast
. Press [JOYSTICK] in and release to select
Contrast
.
9.Press [JOYSTICK] up/down to change
Contrast
from 1-10. Press [JOYSTICK] in and release to save settings.
Note:
Contrast
setting 1 offers little distinction between black and white shades while setting 10 offers greater
distinction between black and white shades. Press [JOYSTICK] in and release to save changes.
10. Press JOYSTICK up/down to highlight
Power Smoothing.
Press [JOYSTICK] in and release to select
Power
Smoothing
.
11. Press [JOYSTICK] up/down to change Power Smoothing from 1, 2,3,5,10,30. Press [JOYSTICK] in and release to
save settings. Note: Power smoothing 1 displays power data as it is sent from the power sensor, Power smooth-
ing 30 displays power data as a 30 second rolling average which can be used for better pacing during intervals
and races. Press [JOYSTICK] in and release to save changes.
12. Press [JOYSTICK] up/down to highlight
Power With Zeros
. Press [JOYSTICK] in and release to select
Power
With Zeros
.
