Fig. 2-3
Fig. 2-4
C)
On a
Sportster,
mount the amp bracket to the bottom of the A frame using
the lower engine guard (crash bar) bolt locations as shown in
figure 2-5
. If
you have an engine guard installed you will need to detach the bottom 2
bolts to install the amplifier bracket. You may have to slightly enlarge the
amp bracket mounting holes to get the stock bolts to attach the bracket. If
you don
ʼ
t have an engine guard installed use the supplied parts
(9, 10, 11)
to attach the amp bracket as shown in
figure 2-6
.
Fig. 2-5
Fig. 2-6
D)
On a
Metric
motorcycle, look at the bolts holding footboards, frame bolts,
engine guard bolts etc. It takes one bolt to mount the universal amplifier
bracket and it is not critical where it is located so long as the amp and wiring
are secure and away from moving parts and high temperatures.
