Note that the speakers can be attached to p-clamps in either direction
depending on available space and installed equipment such as a
windscreen.
When securing the speakers for final placement, remember that they should
be pointed as close to your ear level as possible for the best results.
Note:
Installation using the mirror stem Z-brackets can only be done
with the Series 1 and Series 2 speakers on a Harley-Davidson
motorcycle and will not be included in other kits
as they can
ʼ
t be used in
other applications.
B)
To install speakers using Mirror Stem Z-brackets
(17)
, start by attaching the
short end of the Z-bracket to the speakers using the supplied speaker bolts
(8)
as shown in
figure 4-5
. Next, remove the mirror stem nut located
underneath the control housings and slide the Z-bracket onto the mirror
stem and reassemble as shown in
figure 4-6
.
Fig. 4-5
Fig. 4-6
Before tightening the mirror stem bolts for final speaker placement you will
want to make sure that the speakers and brackets do not interfere with any
of the controls or steering. Specifically you will want to check the speaker
clearance near the gas tank, which may require adjustment of the brackets
